Compliance, risk management
and machine reliability for users
We help you to ensure the legal compliance and safety of your machine fleet throughout its lifetime.
Request a quote
We help you to act correctly with regard to your machines
in a complex regulatory environment.
Our technicians accompany you through the various stages of your machinery's regulatory path to verify the conformity of its CE marking and help you eliminate the risk of related occupational accidents.
Pre-purchase study
Before purchasing a machine, we answer your questions about CE marking in relation to a possible modification or integration into a set of machines.
Modification or integration of a machine
When you modify or adapt a machine that you have just bought, integrate it into a set of machines or use it in a different way than intended, the manufacturer's CE marking is no longer valid for the modified parts and you must prove that the modification does not pose a risk. At Eurocontrol, we advise you on the technical file and risk assessment and ensure the conformity of the final installation and the safety of your workers.
Sale of machines
We advise you on the verification of conformity prior to the sale of your machines.
CE marking of machines vs RD 1215:
two levels of safety
As a machine user, you must comply with certain requirements to guarantee the safety of your workers. Royal Decree 1215/1997 establishes the minimum health and safety provisions for the use of work equipment, but CE marking guarantees you a higher level of safety.
Our services
-
Pre-design phase
Advice and technical assistance
- Technical assistance on previously identified critical pointsTechnical assistance for the conformity assessment of a machine according to Directive 42/2006/EC and the new regulation (EU) 2023/1230 of the European Parliament and of the Council of 14 June 2023 on machinery.
Assistance in the development of risk analysis when designing the machine.
Verification of corrective actions after a customer service inspection.
-
Manufacturing phase
Pre-assessment and monitoring of manufacturing
- Pre-assessment of conformity and monitoring of manufacture to ensure compliance with customer specifications and deadlines
Manufacturing testing
- Support to product testing and FAT (Final Acceptance Test)
Verification of conformity
- Verification that the machine complies with the Directive and the new Machinery Regulation on leaving the factory and verification of corrective actions. -
Integration phase
Examination according to instructions
- Examination of the installation conditions in relation to the operating instructions.Verification of corrective actions after a customer service inspection.
-
Operation phase
Prevention of user exposure to risks
- Quality of the workplace environment, air quality, ventilation, lighting, vibrations, radiation, noise pollution, asbestos, etc.
- Adequacy of work equipment: RD 1215.Identification and anticipation of the ageing of installations
- Non-destructive tests (ultrasound, penetrating liquids, etc.) on fatigue, ageing and useful life, monitoring over time.
Conformity diagnosis of machines in service (set of machines).
Verification of modifications made to machines in service
Verification of corrective actions following a customer service inspection.
The Eurocontrol plus
In addition to the general services you have just seen, applicable to all machines, Eurocontrol offers you specific services for certain types of machines:
- Assistance in the conformity assessment of a collaborative robotic application, in design, manufacturing and installation phases.
- Examination before first use (commissioning) or re-commissioning of static steel storage systems and storage racks.
- Periodic inspection of static steel storage systems, storage racks and storage shelves
- Examination before first use "Commissioning" or re-commissioning of scaffolding
- Periodic inspection of mobile scaffolds
- Periodic inspection of fixed or suspended scaffolds
- Periodic inspection of ladders
- Periodic inspection of doors and gates (garage or pedestrian)
- Examination before first use (commissioning) or re-commissioning of doors and g ates (garage or pedestrian)
Why Eurocontrol?
- We guarantee that modifications or integrations of your machines comply with the legal requirements.
- We advise you on the safety of your machines.
Discover our other
lines of activities
Why choose Eurocontrol ?
A team of experts at your disposal
Geographical coverage at national level
