air and plant cooling pipes

Periodic inspection of refrigeration installations

Used in food preservation, indoor air quality control, gas liquefaction, industrial process control, food and beverage production, and computer cooling, refrigeration systems consume about 15% of the world's electricity.

However, poorly controlled and therefore inefficient use can be a real waste of energy resources and contribute to global warming. The issue is therefore mainly linked to the energy production required to power them and their inspection to avoid over-consumption is therefore essential.

Request a quote

Do not hesitate to contact us for more information, our experts are at your disposal.

What is

Periodic inspection of refrigeration installations?

The periodic inspection of refrigeration installations and their safety conditions guarantees compliance with the constant temperature and hygiene conditions necessary in industrial processes and hygrothermal comfort in buildings.

 

In compliance with European Union regulations, RD 552/2019, of 27 September, which approves the safety regulations for refrigeration installations and their complementary technical instructions, not only establishes the technical requirements that refrigeration installations must comply with in order to respect their safety conditions and reduce the production of waste and greenhouse substances, but also stipulates the conditions for the periodic inspection of refrigeration installations, which must be carried out by an authorised control body.

Our services

factory cooling system
factory cooling system

Types of inspection

 

  • Periodic inspection
  • Documentary review and Pre-commissioning Inspection (EICI)

 

Periodicity of Periodic Inspections of Refrigeration Installations

 

The legislation establishes that level 2 refrigeration installations shall be inspected every ten years. Regardless of the level of the installations, those using fluorinated refrigerants shall be inspected if their refrigerant charge is equal to or greater than 50 tonnes of CO2 equivalent. In refrigeration installations that must undergo periodic inspections, it will be checked, as a minimum, that the mandatory inspections and controls of refrigerant leaks, waste management, mandatory documentation, compliance with the health and hygiene criteria for the prevention and control of legionellosis and the inspection of pressure equipment of refrigeration installations that correspond to category I of the Pressure Equipment Regulation are carried out.

Level 2 refrigeration installations are understood to be those installations made up of one or several independent refrigeration systems with an electrical power installed in the compressors exceeding 30 kW in any of the systems, or where the total electrical power installed in the refrigeration compressors exceeds 100 kW, or which cool artificial atmosphere chambers, or which use medium and low safety refrigerants (L2 and L3).

 

The frequency of inspections is as follows:

  • Installations in general: 10 years
  • Installations using fluorinated refrigerants with a charge equal to or greater than 5000 tonnes of CO2 equivalent: annual
  • Installations using fluorinated gases with a charge of less than 5000 tonnes of CO2 equivalent but equal to or greater than 500 tonnes of CO2 equivalent: 2 years
  • Installations using fluorinated gases with a charge of more than 50 tonnes of CO2 equivalent but less than 500 tonnes of CO2 equivalent: 5 years

Discover our other

related services

pressure gauge for pressure equipment
Inspection of pressure equipment and installations

We carry out regulatory inspections of pressure equipment subjected to a maximum allowable pressure of more than 0.5 bar as an authorised control body (ACO) and check its safety for marketing as a notified body.

fire extinguishers
Inspection of fire-fighting installations
In order to preserve safety and integrity of people and property, Eurocontrol realize fire fighting installations checking periodically to ensure the performance of your installations.
""
Training

More than 30 years of experience in technical training in standards and regulations, both for our employees and our clients.

We are specialists in technical training on international and national standards and regulations in all sectors of activity that are concerned with ensuring the safety of workers, minimising risks, and creating safe, reliable and quality products and services for the market. Our courses are given by specialists in each subject and offer training that responds to the real needs of companies, as they have been developed based on the practical experience of our technicians.

We manage your training credit so that it is 100% BONUSED.

Why choose Eurocontrol ?

1

A team of experts at your disposal

more than 1,400 people specialised in different technical disciplines.
""

Geographical coverage at national level

with more than 30 branches and international presence in more than 50 countries through the Apave Group.
3

Complementary areas of activity

that allow our clients to combine safety and performance in all stages of their projects.