What is
radioelectric emission control?


The control and measurement of electromagnetic fields generated by non-ionising radiation aims to verify that, in a public or occupational environment, exposure to these fields is within the limits established by the corresponding regulations:
- For the occupational environment, Royal Decree 299/2016 of 22 July on the protection of the health and safety of workers against risks related to exposure to electromagnetic fields, transposing Directive 2013/35/EU.
- For the general public, Royal Decree 1066/2001, which approves the Regulation establishing the conditions for the protection of the public radio spectrum, restrictions on radio emissions and health protection measures against radio emissions.
The exposure limit values established in both regulations are based on the recommendations of the International Commission on Non-Ionising Radiation Protection (ICNIRP).
how can we
help you?
We are specialists in measuring electromagnetic fields. Our technical teams carry out studies to certify that your facilities comply with the basic restrictions and reference levels set out in the regulations applicable to each case.
We use approved, calibrated, state-of-the-art equipment covering the entire spectral range and certified procedures to guarantee the reliability and traceability of the results.
Radioelectric certifications for the occupational environment in accordance with RD 299/2016
We verify compliance with the provisions of the regulations by carrying out the following work:
- Radio certifications
– Performance of broadband radioelectric measurements (Phase 1).
– Carrying out measures in Phase 2 and/or Phase 3 if necessary.
– Preparation of certification of compliance with regulations.
- Theoretical studies
– Modeling of emission of electromagnetic fields.
Radio studies and certifications in accordance with RD 1066/2001
We verify compliance with the provisions of the regulations by carrying out the following work:
- Telecommunications Technical Projects (PTT) or Radioelectric Studies (Type A Certifications)
– Performance of broadband radioelectric measurements (Phase 1).
– Carrying out measures in Phase 2 and/or Phase 3 if necessary.
– Calculation and representation of reference volumes (PLL).
– Project for the installation of signs and/or fencing that restricts the access of non-professional personnel to areas in which the established limits could be exceeded.
– Preparation of a report for the request for authorization to install a radioelectric station.
- Substitute Certifications of the Commissioning Inspection for radio stations (PSC)
– Performance of broadband radioelectric measurements (Phase 1).
– Carrying out measures in Phase 2 and/or Phase 3 if necessary.
– Certificate of radioelectric exposure levels.
– Certificate of Installation with photographic report.
– Authorization request for commissioning.
- Inspection requests for the commissioning of radioelectric stations (PSI)
– Authorization request for commissioning by inspection.
- Annual radioelectric certifications (Type B, Type C and Type D)
– Certificate of radioelectric exposure levels.
- Measures in Phase II
– Selective measurements in frequency, taken with a spectrum analyzer.
- Measures in Phase III
– Measurements in the near field area.
– Taking independent measurements for electric field and magnetic field.
– Selective measurements in low frequency.
Discover our other
related services
Why choose Eurocontrol ?

A team of experts at your disposal
more than 1,400 people specialised in different technical disciplines.

Geographical coverage at national level
with more than 30 branches and international presence in more than 50 countries through the Apave Group.

Complementary areas of activity
that allow our clients to combine safety and performance in all stages of their projects.